Guía de productos

Asombrosos logos reflectantes personalizados

Loxy Print es su socio para crear un asombroso diseño a través de logos, colores u otros elementos gráficos. Utilizando logos y motivos, puede aportar un valor añadido a sus prendas. Según los tejidos que utilice existe una solución Loxy Print adaptada a las características especificas que necesita.

Su marca puede brillar en todas las condiciones, ya sea en ropa deportiva o en ropa de función o de trabajo. Loxy crea logos duraderos y de alta calidad para todas las necesidades, en colores sólidos, disponiendo de capacidades reflectantes para tejidos elásticos o espesos o también ignífugos. Estamos dispuestos a ir muy lejos para encontrar la mejor solución a cada deseo en colaboración con cada uno de nuestros clientes.

Transfer | LOXY Print – LP102

Super elastic quality suitable for light weight sportswear

Key features

  • Color sólido
  • Duradero
  • Elástico
LOXY® HEAT ON TRANSFER LOGO – LP 102 The unique features of LOXY LP102 provide a durable and reliable base for your logo. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. LP102 is the ideal choice for your super elastic sportswear and it comes with high recovery properties.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

ISO 6330 Domestic wash

DETAILED PRODUCT INFORMATION

Certifications

ISO 6330

Domestic wash

-

Transfer | LOXY Print – LP152

Our standard elastic quality suitable for sportswear

Key features

  • Color sólido
  • Duradero
  • Elástico
LOXY® HEAT ON TRANSFER LOGO – LP 152 The unique features of LOXY LP152 provide a durable and reliable base for your logo, without compromising the fine details of complex artwork. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. LP152 is the ideal choice for your elastic sportswear and it comes with good recovery properties.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 6330

Domestic wash

-

Transfer | LOXY Print – LP154

Our soft quality suitable for work wear

Key features

  • Color sólido
  • Duradero
  • Suave
  • Lavado a alta temperatura
LOXY® HEAT ON TRANSFER LOGO – LP 154 The unique features of LOXY LP154 provide a durable and reliable base for your logo, without compromising the fine details of complex artwork. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. At LOXY we are used to harsh washing and drying conditions. LOXY LP154 is a great proof of the LOXY mindset.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 15797

Industrial wash

-

Transfer | LOXY Print – LP157

Our soft quality suitable for flame retardant work wear

Key features

  • Ignífugo
  • Color sólido
  • Duradero
  • Suave
LOXY® FLAME RETARDANT HEAT ON TRANSFER LOGO – LP 157 The unique features of LOXY LP157 provide a durable and reliable base for your logo, without compromising the fine details of complex artwork for your flame retardant work wear. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. At LOXY we are used to harsh washing and drying conditions. LOXY LP157 is a great proof of the LOXY mindset.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 15797

Industrial wash

-

Transfer | LOXY Print – LP272

Our soft reflective quality suitable for functional wear

Key features

  • Reflectante
  • Duradero
  • Suave
LOXY® HEAT ON TRANSFER LOGO – LP 272 The unique features of LOXY LP272 provide a durable and reliable base for your logo, with reflective abilities. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. LP272 is a great proof of the LOXY mindset and it is the ideal choice for your functional wear.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 6330

Domestic wash

-

Transfer | LOXY Print – LP274

Our soft reflective quality suitable for work wear

Key features

  • Reflectante
  • Duradero
  • Suave
  • Lavado a alta temperatura
LOXY® REFLECTIVE HEAT ON TRANSFERLOGO – LP 274 The unique features of LOXY LP274 provide a durable and reliable base for your logo, with reflective abilities. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. At LOXY we are used to harsh washing and drying conditions. LOXY LP274 is a great proof of the LOXY mindset.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 15797

Industrial wash

-

Transfer | LOXY Print – LP277

Our soft reflective quality for flame retardant work wear

Key features

  • Ignífugo
  • Reflectante
  • Duradero
  • Suave
LOXY® FLAME RETARDANT REFLECTIVE HEAT ON TRANSFER LOGO– LP 277 The unique features of LOXY LP277 provide a durable and reliable base for your logo, with reflective and flame retardant abilities. Thanks to the PMS color system, your most valuable assets will be presented in the best possible and accurate way every time. Always. At LOXY we are used to harsh washing and drying conditions. LOXY LP277 is a great proof of the LOXY mindset.

STEP 1: Preheat
Preheat the fabric for 5 seconds at 150 °C with the pressure at 3–4 kg/bar. This is for removal of residues, impurity and to reduce shrinkage issues. Preheat for 10 seconds if the fabric is shrinking more than average.

STEP 2: Transfer
Apply the transfer, with the film facing upwards, on the preheated material with a temperature of 150 °C with the pressure at 3–4 kg/bar for 12–14 seconds. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

STEP 3: Cool down
Wait for the fabric and transfered logo to cool down, before removing the carrier film.

STEP 4: Afterheat
Preheat the fabric for 3 seconds at 150 °C with the pressure at 3–4 kg/bar. Some fabrics may require additional pressure. Use silicon coated fabric or paper over the transfer logo.

*Application will vary depending on a number of factors including fabrics, machinery involved, working conditions and more. Before use in bulk production, each transfer quality and fabric should be individually tested to ensure proper application.

WASH CARE

DETAILED PRODUCT INFORMATION

Certifications

ISO 15797

Industrial wash

-